EasyManuals Logo

Edwards iGx User Manual

Edwards iGx
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
A546–00–880 Issue E
Page 2 © Edwards Limited 2014. All rights reserved.
Edwards and the Edwards logo are trade marks of Edwards Limited.
Introduction
The pressurised and risk of explosion warnings only appear in this manual.
Material Safety Data Sheets for chemicals supplied by Edwards can be obtained by contacting Edwards.
1.2 Applications
If using the iGX system on an application for which it is not suitable (refer to Figure 1), the warranties may invalidate.
If in doubt, contact Edwards for advice as to the suitability of the iGX system for any particular application.
Figure 1 - iGX Applications chart
1.3 The iGXL system
Pumping a chemical that will attack the materials in contact with these process materials may, over time, result in
the internal contents of the pump becoming exposed to the external environment, which may constitute a safety
hazard. If in doubt, contact Edwards for advice as to the suitability of this pump for any particular application.
It is also a feature of this pump design that process gases are contained within the gearbox. This pump is not suitable
for use with flammable, hazardous, toxic or corrosive gases or material.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edwards iGx and is the answer not in the manual?

Edwards iGx Specifications

General IconGeneral
BrandEdwards
ModeliGx
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals