© Edwards Limited 2014. All rights reserved. Page 33
Edwards and the Edwards logo are trade marks of Edwards Limited.
Service, Spares and Accessories
A546–00–880 Issue E
7 Service, Spares and Accessories
7.1 Introduction
Note: Whenever returning the iGX system to an Edwards Service Centre or other Edwards company, comply with
the requirements of Section 7 and with the requirements of the Return of Edwards Equipment Procedure
(refer to forms HS1 and HS2 at the rear of this manual).
Do not drain the oil from the iGX pump. Clearly state the pump is full of oil when completing form HS2
Edwards products, spares and accessories are available from Edwards companies in Belgium, Brazil, China, France,
Germany, Israel, Italy, Japan, Korea, Singapore, United Kingdom, U.S.A and a world-wide network of distributors.
The majority of these centres employ Service Engineers who have undergone comprehensive Edwards training
courses.
Order spare parts and accessories from the nearest Edwards company or distributor. When ordering, state for each
part required:
Model and Item Number of the equipment
Serial number
Item Number and description of part
7.2 Service
Edwards products are supported by a world-wide network of Edwards Service Centres. Each Service Centre offers a
wide range of options including: equipment decontamination; service exchange; repair; rebuild and testing to factory
specifications. Equipment which has been serviced, repaired or rebuilt is returned with a full warranty.
The local Service Centre can also provide Edwards engineers to support on-site maintenance, service or repair of the
equipment.
For more information about service options, contact the nearest Service Centre or other Edwards company.
Whenever returning the dry pumping system to an Edwards Service Centre or other Edwards
company, comply with the requirements of the Return of Edwards Equipment Procedure (refer to
forms HS1 and HS2 at the rear of this manual).
To Next Page
Loading...
Need help?
General
