Edwards iXM Series User Manual

7. Check that the package has the items given in Table: Checklis
t of items. If the items
are missing, nofy the supplier in wring in three days.
8. If the pump is not to be used immediately, store the pump in correct condions as
given in Storage.
9. It is advised to keep all packing materials for use to return the pump for service.
Table 16 Checklist of items
Quanty
Descripon
Check
1 iXM pump system
q
1(4)* Eye bolts
q
1 Instrucon manual (M56635880)
q
*4 eye bolts are provided only for iXM3000
4.3
Posion the system
WARNING: HEAVY OBJECT
Risk of injury and damag
e to the equipment. Use correct liing equipment to move
the dry pumping system. Failure to do so can cause injury to people and damage to
the equipment.
WARNING: TRANSPORTATION SAFETY
Risk of injury or damag
e to equipment. Do not exceed the topple angle of 10° when
you move the pump. Wheel the system on its castors to move it to the operang
posion. The system should only be wheeled for short distances over at surfaces. If
the oor surface is uneven or has obstacles, li the system with the correct liing
equipment. If liing the system is impraccal, or there are other site dicules,
contact us for advice.
45
o
MAX
WARNING: PAIRED SLINGS
Risk of injur
y or damag
e to equipment. Make sure that the maximum angle between
paired slings used to li the system is 45°. Rotaon of the eye bolts under load must
be prevented.
Install the system on a rm, non‑combusble, le
vel surface, capable of supporng pump
mass, to make sure that it works correctly and the system is not damaged.
Make the pump level to a maximum of 3° in all direcons, measured at the pump inlet.
The castors are intended only to aid the movement of the system to the nal operang
posion. The force to push a pump on castors varies because of the surface nish,
cleanliness of the oor and any slopes or inclinaon. The user must do a risk assessment
of the locaon to make sure that the system is moved safely. Obey all local and naonal
manual handling guidelines when you move the system.
1. Give a rm, lev
el plaorm, which is strong enough to support the weight of the
pump and ancillary equipment.
10/2020 - ©Edwards Limited
Page 27M56635880_D
M56635880_D - Inst
allaon

Edwards iXM Series Specifications

General

Brand	Edwards
Model	iXM Series
Category	Water Pump
Language	English