Edwards iXM Series User Manual

Test Mode
* This opon requires a security code t
o access it.
§ The PDT must be in control to perform these funcons.
GAS VALVES menu
1. Press up/down keys to scroll. Press ENTER to open a sub menu.
2. Press CANCEL to return to the SETUP menu. Sengs do not appear if they ar
e not
installed.
3. Refer to Table: GAS VALVES menu. Press the up/down keys to select on/o.
4. Press ENTER to accept.
5. Press CANCEL to return to the GAS VALVES menu.
Table 24
GAS VALVES menu
Set N
2
Seal
Set Inlet 1
Set Bypass
Set Exhaust 2
USB menu
1. Press up/down keys to scroll. Press ENTER to open a sub menu.
2. Press CANCEL to return to the SETUP menu.
Table 25 USB menu
USB acquire logs...
USB upgrade...
USB conguraon...
USB acquire logs menu
Data Log: On-board data log which shows parameters, status and events.
Session Log: When a PC is connected, records the user ID of the person who is
connected and the PC name. History of the conguraon le updates on the pump.
Crical Logs: This opon stores 22 minutes of data around a crical event (20 before and
2 aer). Up to 4 crical events can be stored.
Conguraons: It shows all the details of conguraon soware updates since the last
default reset on the pump.
USB upgrade menu
This is used to update the exisng execuve soware on the pump.
10/2020 - ©Edwards Limited
Page 55M56635880_D
M56635880_D - Commission

Edwards iXM Series Specifications

General

Brand	Edwards
Model	iXM Series
Category	Water Pump
Language	English