Warning/Cauon
An appropriate safety instrucon must be followed or cauon to a
potenal hazard exists.
Warning - Dangerous voltage
Idenes possible hazards from dangerous voltages.
Warning - Hot surfaces
Idenes a potenal hazard from a hot surface.
Warning - Use protecve equipment
Use appropriate protecve equipment for the task.
Warning - Risk of explosion
There is a risk of explosion when you do the task.
Warning - Environmental hazard
Idenes possible hazards to the environment.
Warning - Flammable material
The material is ammable. If exposed to sources of ignion it can cause
a re.
Warning - Corrosive substances
The substance is corrosive.
Warning - Toxic material
The material is toxic.
1.3 General precauons
CAUTION: AUTOMATIC RESTART AFTER VOLTAGE FAILURE
Risk of damage to equipment. If the machine is equipped with an automac restart
aer voltage failure funcon and if this funcon is acve, be aware that the machine
will restart automacally when the power is restored if it was running when the
power was interrupted.
Note:
All responsibility for any damage or injury resulng from neglecng these precauons, or
non
‑
observance of the normal cauon and care required for installaon, operaon,
maintenance and repair, even if not expressly stated, will be disclaimed by the
manufacturer.
Some precauons are general and cover several machine types and equipment, hence
some statements may not apply to your machine.
These precauons apply to machinery processing or consuming air or inert gas.
Processing of any other gas requires addional safety precauons typical to the
applicaon which are not included in this manual.
07/2020 - Page 7
A35104880_B - Safety and compliance