Edwards nES Series User Manual

11. Return the equipment or components for service
Before you send your equipment to us for service or for any other reason, you must
send us a completed Declaraon of Contaminaon of Vacuum Equipment and
Components – Form HS2. The HS2 form tells us if any substances found in the
equipment are hazardous, which is important for the safety of our employees and all
other people involved in the service of your equipment. The hazard informaon also
lets us select the correct procedures to service your equipment.
We provide instrucons for compleng the form in the Declaraon of Contaminaon of
Vacuum equipment and Components – Procedure HS1.
If you are returning a vacuum pump, note the following:
▪
If a pump is congured to suit the applicaon, make a record of the conguraon
before returning the pump. All replacement pumps will be supplied with default
factory sengs.
▪
Do not return a pump with accessories ed. Remove all accessories and retain
them for future use.
▪ The instrucon in the returns procedure to drain all uids does not apply to the
lubricant in pump oil reservoirs.
Download the latest documents from www.edwardsvacuum.com/HSForms/, follow the
procedure in HS1, ll in the electronic HS2 form, print it, sign it, and return the signed
copy to us.
NOTICE:
If we do not receive a completed HS2 form, your equipment cannot be serviced.

Edwards nES Series Specifications

General

Brand	Edwards
Model	nES Series
Category	Water Pump
Language	English