Operaon
Operaon safety
WARNING:
Do not opera
te the pump with any parts of the enclosures removed or damaged as
there may be a risk of an electric shock.
WARNING:
Do not expose an
y part of the human body to the vacuum as this could result in injury
to or death of people.
WARNING:
Risk of burns. Do not touch the pump inle
t manifold or exhaust whilst the pump is
running since the temperatures of these parts could be high enough to cause harm.
Elevated temperatures could remain aer the pump has stopped.
WARNING:
Risk of burns from hot surf
aces and/or damage to equipment. Do not exceed the
maximum connuous operang pressure.
CAUTION:
The sy
stem has an autorun mode which is designed to automacally start the pump
system once power is applied.
CAUTION:
Do not use the pump to pump parculates or c
ondensable media. Deposion may occur
within the pump which will degrade pump performance and reduce the pump life.
CAUTION:
The con
trolling interface is determined by the interface that starts the pump. Once
started, the pump can only be stopped or put in standby mode by the interface that it
was started from, except in autorun. With autorun, the stop buon on the user
interface panel will override it and stop the pump.
A770-10-880A - Operaon
Page 21
To Next Page
Loading...
Need help?
General
