Edwards nXLi Series - Storage

Storage
WARNING:
Do not drain oil fr
om the pump whether dangerous substances have been pumped or
not. Blanking plates must be ed to seal vacuum inlet and outlet ports to prevent
possible oil leakage. Ensure the pump is correctly labelled. If in doubt, contact Edwards.
To store the pump:
1. Shut do
wn the pump as described in Shut down the pump on page 25.
2. Disconnect the pump from the electrical supply.
3. Place and secure protecve covers over the inlet and outlet ports.
4. Store the pump in clean, dry condions unl required for use.
5. When required, prepare and install the pump as described in Installaon on
page 15.
A770-10-880A - Storage
Page 28