AutoCal V3 User Guide
support@efilive.com - 17 - www.efilive.com
2. On AutoCal V3 navigate to Options -> F2: File System -> F3: USB Thumb
Drive.
Where the thumb drive is active, performing functions like programming device
settings and BBX will result in error $01C3, the FlashScan/AutoCal V3 device is
currently being used as a Windows USB thumb drive. De-activate the thumb drive
option on FlashScan/AutoCal V3 to use these functions.
Licensing a Controller
After navigating and selecting a tune file to flash, the first time a flash is performed
it must be allocated an available VIN license. To perform the allocation you will be
presented with two questions on the AutoCal:
Press the button on the AutoCal keypad to
confirm you wish to license the controller to the
AutoCal device.
Press the X Button if you do not want to license
the controller.
This is a final confirmation you wish to allocate the
license. Pressing the button on the AutoCal
keypad performs the license allocation.
Press the X Button if you do not want to license
the controller.
To Next Page
Loading...