AutoCal V3 User Guide
support@efilive.com - 23 - www.efilive.com
Diagnostics -> [F2: Trouble Codes] -> [F1: Display DTCs] menu
F1: EPA Current DTCs; Display emissions related
trouble codes that are currently active
F2: EPA Pending DTCs; Display emissions
related trouble codes that are potentially about to
be set.
F3: MFG Set DTCs; Display all codes that are
currently active.
F4: MFG All DTCs; Display all codes that are set
or about to be set.
Diagnostics -> [F3: Test Results] menu
F1: System Readiness; Display system readiness
test results.
F2: OS Sensors; Display O2 sensor test results.
Not supported by CAN based vehicles, use
“Mode $06” instead.
F3: Mode $06 (Failed); Display only failed mode 6
test results. More info available via OEM
supplied, online data. Search for GM “mode 6” or
Cummins “mode6”.
F4: Mode $06 (All); Display ALL (failed and
passed) mode 6 test results. More info available
via OEM supplied, online data. Search for GM
“mode 6” or Cummins “mode6”.
F1: Setup; opens the setup menu.
F2: File System; opens the file system menu.
F3: About; opens the device information menu.
F4: Self Tests; opens the test menu
To Next Page
Loading...