EggRider V2 - Page 36

5.6.2 RESET BATTERY STATS
Option to reset battery statistics.
Options
1st Battery
2nd Battery
3rd Battery
5.6.3 BATTERY CHARGING
This function allows you to set an alarm when the battery reaches a specic voltage.
Steps to setup:
Enable Monitor charging when is locked
Select the your desired voltage
Open Dashboard page and press Lock icon
Start charging your battery
When the voltage on the dashboard will reach the voltage you set at step 2, a sound alarm and a popup will
be triggered
Please see Notes below
Notes
Make sure your phone is on loud.
When you start charging the voltage should be at least 1 volt lower than your desired voltage.
This does not stop your charging, it is just an allert.
Your phone has to be connected at all time, connection loss might disable the functionality.
5.6.4 CURRENT CALIBRATION
Option to calibrate current if you know that the controller provides the current with an oset.
5.6.5 ODO Reset
Function used to permanently reset the ODO stats
5.6.6 ODO Offset
Function used to set an oset to the ODO distance in case you want to have your old display distance in the
odo total distance
•
•
•
1.
2.
3.
4.
5.
6.
5.6.2 RESET BATTERY STATS
- 36/89 -
Copyright © 2019 EggRider.