2.4.3 Saving settings
2.4.4 Configure e-bike specific settings
One more step before you're set to go!
On specic models you need to congure the e-bike/controller specic settings to have full functionality.
Please open the navigation menu and go to E-bike settings group and select the page relative to your e-bike/
controller model.
The information on EggRider display it is only saved permanently when the display it is powered o from it's own power button. This
also includes the trip data.
Warning
If you encounter any issues please keep in mind our Troubleshooting page
Tip
At the bottom of each page you can also nd Next and Previous buttons to go through the user manual in sequence.
Tip
Last update: February 5, 2022
2.4.3 Saving settings
- 9/89 -
Copyright © 2019 EggRider.
To Next Page
Loading...