Technical Manual V6.00 18 01.05.2017
4.6.8. Cold Milk Foam CMF
The milk system received additional components, to produce Cold Milk Foam (CMF).
This should be ordered with the machine, as a later retrofit is possible but very complex.
CMF is only available for Top Milk with one milk and one machine! All other versions cannot be equipped with
it.
At the rinsing and cleaning of the machine the way through the CMF-module will be considered, when a CMF-
product was produced before. Additional maintenance work is not necessary for the CMF-module.
Cold milk foam can have different stiffness. We integrated three levels with the following parameters:
The stiffness will be done mainly with the milk pump. Mixer and air-pump should not be adjusted.
If the retrofit with the CMF-module is planned, take care that the coffee machine must have the extension
board.
To Next Page
