Egro ONE - 1 Introduction; 2 Technical Data; Dimensions; Drilling Plan

Technical Manual V6.00 6 01.05.2017
1. Introduction
This manual is intended to give you additional information to the machines Egro ONE, Egro TWO and Egro BYO which are
not in the installation manual delivered with the machine or in the user manual. This manual will be updated on a
regularly base. The updates are available in our Download area without further notification.
In this manual only information, which are not given in the above mentioned manuals.
Please check yourself on www.ranciliogroup.com/Support
The user manuals of the machines are available for download on our homepage www.ranciliogroup.com
2. Technical data
2.1. Dimensions
The dimensions are given in the manuals of the machines. Detailed drawings will be distributed via the homepage.
2.2. Drilling plan
1
Machine layout
2
Hole for pipes and cables
3
Grounds drawer
4
Machine foot