Egro ONE - 3 Installation; Electrical Connections; Change Power Settings; Stop Using the Machine

Technical Manual V6.00 8 01.05.2017
3. Installation
The installation of the coffee machine is described in the installation manual.
3.1. Electrical connections
The machines are delivered according to the information on the type label, but they offer different electrical connections.
Power supply
Power rating
Identification
“Reduced Power”
220-240V 3~, 50/60Hz
6.0kw
2P
OFF
380-415V 2N~, 50/60Hz
6.0kw
2P
OFF
220-240V 1N~ 50/60Hz
6.0kW
1P
OFF
220-240V 1N~ 50/60Hz
3.6kW
LP
ON
208/240 V2ph~, 60Hz
5/6kW
-
OFF
3.1.1. Change power settings
The power settings can be changed depending on the available power supply. The electrical diagram in the appendix
shows the different ways to connect the machine.
When connecting the machine to 220-240V 1N~ 50/60Hz with 16A fuse the parameter “Reduced Power” has to be
changed to “ON”.
3.2. Stop using the machine
Warning! Only a qualified person is allowed to disconnect the machine from the main power supply!
- Clean the machine, on machines with milk a milk cleaning has to be done!
- Switch off the circuit breaker
- Disconnet from water and electric power, if necessary.
- Cover the machine and place it in a dry room, not exposed to environmental elements
Final Stop: Cut of the power supply cable. Consign the machine to authorized companies for its disposal.