Technical Manual V6.00 53 01.05.2017
8. Egro ONE Multi Drink
8.1. Prepare machine
We recommend to order the machine as Egro ONE Multi Drink.
However, every Egro ONE Touch can be converted to an Egro ONE Multi Drink.
Egro ONE Multi Drink does not support the options AS, CMF und SAG, and not the necessary extension board. If these
options are built in the machine, we disadvise a modification towards an Multi drink machine.
Preconditions for the conversion are:
- Central hot water outlet (retrofit able)
- NO hot water outlet on the side
- Bypass single cup (option to order or retrofit)
- Multi Drink – SD-card
This description shows the mechanical/hydraulic change.
The central hot water connects to the outlet with the connector no. 10-701-019, which can be ordered in our spare parts
portal. Together with the bypass option, make the conversion, to have the following situation in the machine.
We recommend to completely remove the hot water outlet on the side, as it will not be used anymore.
Outlet with central hot water Bypass in the machine
To Next Page
