Egro ONE - Keypad Settings

Technical Manual V6.00 35 01.05.2017
Product setup
Water test
Delivers water for 10 sec. to the powder module -> measure volume and insert value at “Water
amount”
Water amount
Amount of water delivered in 10 sec.
Fan stop time
Follow-up time of the van after the powder delivery
Left screw speed
Speed of the left screw drive (is normally at 100 %!) *
Right screw speed
Speed of the right screw drive (is normally at 100 %!) *
Mixer speed
Speed of the mixer (is normally at 100 %!) *
Mixer delay
Delay of the mixer after the water starts running
Powder delay
Delay of the powder delivery after the mixer is working
Stop mixer
Follow-up time of the mixer after the powder delivery
Auto rinse time
Time for the automatic rinse after the last delivered powder product
*for special application the motor speed can be reduced