20
Basic Operation
Real Standby Function
1. Press the [POWER] button, unit will enter
stand by mode. The unit will enter real
stand by mode after 10 seconds.
2. While recording and press [POWER]
button, the screen which pump up a
dialog.
z Select [Yes]: Recording will be
stopped and enter stand by mode,
unit will enter real stand by mode
after 5 seconds.
z Select [No]: Unit will continue
recording and enter stand by mode. When recording complete, unit will
enter real stand by mode.
z Select [Cancel]: Exit the dialog.
3. When the timer function is activated in real stand by mode, the unit will turn on
automatically and enter stand by mode & start recording. After recording
completed, unit will enter real stand by mode and wait for next timer start.
To Next Page
Loading...