Eizo ColorEdge CS2410 - Page 20

20
Chapter 3 Advanced Adjustments/Settings
Function Settings Description
Picture Expansion Auto
*1
Full Screen
Aspect Ratio
Dot by Dot
The screen size of the monitor display can be changed.
• "Auto"
The monitor automatically changes the screen size
according to the resolution information and aspect ratio
information from the input signal.
• "Full Screen"
Displays an image in full screen. Images are distorted
in some cases because the magnication ratio is not
necessarily xed vertically and horizontally.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 16:9
aspect ratio.
• "Aspect Ratio"
Displays an image in full screen. However, since aspect
ratios are maintained, part of an image may not be visible in
horizontal or vertical direction.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 4:3
aspect ratio.
• "Dot by Dot"
Displays the image at the set resolution or at the size
specied by the input signal.
Note
• Example settings
- Full Screen
- Aspect Ratio
- Dot by Dot (Input Signal)
*1 Only enabled when input signal information for automatically determining the setting is detected during
HDMI input