22
Chapter 3
Advanced Adjustments/Settings
●
Preferences
The monitor's settings can be congured to suit the usage environment or personal preference.
Function Settings Description
Auto Input Detection Off
On
When this function is set to "On", the monitor automatically
recognizes the connector through which signals are input,
so that the screen can be displayed. When the input signal
of the selected connector disappears, another signal is
automatically displayed.
When set to "Off", the monitor displays the signal from the
selected connector regardless of whether a signal is input or
not. In this case, select the input signal to display using the
operation switch (
) on the front of the monitor.
Note
• When the main power is turned on/off, the signal is
detected automatically regardless of the setting for this
function.
Menu Rotation 0°
90°
This function allows you to change the orientation of the
Setting menu to align with the installation orientation.
Note
• When using the monitor screen in a portrait position, the
graphics board supporting portrait display is required.
When placing the monitor in a portrait position, settings
of your graphics board need to be changed. Refer to the
User's Manual of the graphics board for details.
• When using the monitor in a portrait position, rotate the
monitor after pulling up the screen to the uppermost
position of the stand and setting the screen tilted upward.
To Next Page
Loading...
