18
Perform Easy Setup
Necessary settings for displaying network camera images on the monitor.
1.
Start up the network camera(s).
For network camera setup, refer to the network camera’s manual.
Attention
• Connect cameras other Panasonic or AXIS network cameras using ONVIF. Check if ONVIF is enabled in the
settings of the camera.
2.
Check that “Easy Setup” is selected and press .
3.
Check that “Start” is selected and press .
The Easy Setup wizard starts and the date/time setup screen is displayed.
4.
Set the date and time on the monitor.
1
2
3
1. Select “Date/Time Display Settings” and press .
2. Set the “Date Format”, “Time Format” and “Time Zone”.
Select the list box of an item and press .
Select a setting with
or and press .
3. After completing the setting, select “Apply” and press .
The setting complete screen is displayed. Select “OK” and press
.
4. Press
.
To Next Page
Loading...
