22
7.
Set the positions for displaying the network camera images.
Indicates the display
positions on the monitor
screen.
1
4
1. Press .
The “After Change” list box is selected.
2. Set a network camera to a position for displaying images.
Select the list box of a display position you wish to set and press .
Select a network camera with
or and press .
3. After completing the setting, press .
4. Select “Next” and press
.
Attention
• All cameras discovered at step 6 must be set. A network camera can only be set for one display position.
When there are incorrect settings, “Next” cannot be selected.
8.
Finish Easy Setup.
1
1. Check that “End” is selected and press .
The setting complete screen is displayed. Press to select “OK”.
Easy Setup is completed.
To Next Page
Loading...
