Eizo FlexScan EV3237 - Chapter 2: Basic Adjustment and Settings; Button Operation Method

- 13 -
Chapter 2 Basic Adjustment/Setting
Chapter 2 Basic Adjustment/Setting
This monitor enables users to change the screen layout or brightness according to personal preference or to suit the usage environment and reduce power
consumption to conserve energy.
This chapter describes the basic functions that can be adjusted and set using the function buttons on the front of the monitor.
For advanced adjustment and setting procedures using the Setting menu, see “Chapter 3 Advanced Adjustment/Setting” (page 25).
2-1. Button Operation Method
1.
Displaying the operation guide
1. Press any button (except ).
The operation guide appears above the buttons. (Guide display differs depending on screen layout.)
2.
Adjusting/setting
1. Press the button for adjustment/setting.
The Adjustment/Setting menu appears.
(A submenu may also be displayed. In this case, select the item for adjustment/setting using
and select .)
2. Perform adjustment/setting with the buttons and select to accept the changes.
3.
Exiting
1. Select or to exit the menu.
2. When no menu is displayed, the operation guide will automatically disappear after a few seconds if no buttons are operated.