- 49 -
Chapter 6 Reference
6-4. Making Use of USB (Universal Serial Bus)
This monitor is equipped with a USB hub. It functions as a USB hub when connected to a USB-compatible PC, allowing the connection of peripheral USB
devices.
Note
• This product supports USB 3.0. When connecting to peripheral devices that support USB 3.0, high-speed data communication is possible (however, only when the USB cable
used to connect the PC and peripheral device is USB 3.0 compliant).
●
Required System Environment
• A PC equipped with a USB port
• Windows 8.1 / Windows 8 / Windows 7 / Windows Vista, Mac OS X 10.2 or later, Mac OS 9.2.2
• EIZO USB cable (UU200SS (USB 3.0))
Attention
• This monitor may not work depending on the PC, OS, or peripheral devices to be used. For USB compatibility of peripheral devices, contact their manufacturers.
• When the monitor is in power saving mode, devices connected to the USB downstream port will still work. Therefore, power consumption of the monitor varies with
connected devices even in power saving mode.
• When the main power of the monitor is off, a device connected to the USB downstream port will not operate.
• When “USB CHARGE Port” on the Preferences menu is set to “Charging Only”, the peripheral device will not operate even if connected to the “CHARGE” port.
• Before changing the “USB CHARGE Port” setting, disconnect all communication between the PC and all peripheral devices connected to the monitor. Changing this
setting temporarily cuts off all communication.
To Next Page
Loading...
