EasyManuals Logo
Home>Eizo>Monitor>FlexScan EV3237

Eizo FlexScan EV3237 User Manual

Eizo FlexScan EV3237
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
- 27 -
Chapter 3 Advanced Adjustment/Setting
Function
Color Mode
(Functions that can be adjusted differ
depending on the color mode.)
√: Adjustable -: Not adjustable
Setting Range Description Note
User1
User2
sRGB Paper Movie DICOM
Contrast - - - 0 to 100 The brightness of the screen is adjusted by
varying the video signal level.
A contrast of 50 displays every
color gradation.
When adjusting the monitor,
it is recommended to perform
brightness adjustment, which
does not lose gradation
characteristics, prior to contrast
adjustment.
Perform contrast adjustment in
the following cases.
- If the image is too dark even
when the brightness is set to
100 (Set the contrast to higher
than 50.)
Temperature - - Off
4000 K to
10000 K
(specied in
500 K units,
includes 9300 K)
Adjust the color temperature.
The color temperature is normally used to
express the hue of “White” and/or “Black”
with a numerical value. The value is
expressed in degrees “K” (Kelvin).
The screen becomes reddish at low color
temperatures and bluish at high color
temperatures, similar to the temperatures of
a ame. A gain preset value is set for each
color temperature setting value.
The value shown in “K” is
available only as a reference.
“Gain” allows you to perform
more advanced adjustment.
If set to “Off, the image is
displayed in the preset color of
the monitor (Gain: 100 for each
RGB channel).
When the gain is changed,
the color temperature setting
changes to “Off.
Gamma - - - - 1.8
2.0
2.2
2.4
Adjust the gamma.
While the brightness of the monitor varies
depending on the input signal, the variation
rate is not proportional to the input signal.
Maintaining the balance between the input
signal and brightness of the monitor is
referred to as “Gamma correction”.
If “Paper” is selected for the
color mode, “Paper” is displayed
for the gamma value.
If “DICOM” is selected for
the color mode, “DICOM” is
displayed for the gamma value.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eizo FlexScan EV3237 and is the answer not in the manual?

Eizo FlexScan EV3237 Specifications

General IconGeneral
3DNo
Pixel pitch0.1815 x 0.1815 mm
Aspect ratio16:9
Screen shapeFlat
Display diagonal31.5 \
Display technologyLED
Viewable size, vertical392 mm
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal696.9 mm
Display brightness (typical)300 cd/m²
Supported graphics resolutions720 x 400, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA), 2560 x 1440, 3840 x 2160
On/off switchYes
DVI-D ports quantity1
Headphone connectivity3.5 mm
USB upstream port typeUSB Type-B
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity3
Product colorBlack
Market positioning-
Tilt angle range-5 - 35 °
Panel mounting interface100 x 100 mm
On Screen Display (OSD) languagesCHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)105 W
Annual energy consumption57 kWh
Power consumption (standby)0.5 W
Power consumption (typical)39 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesEPEAT Gold, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)245 mm
Height (with stand)578 mm
Weight (with stand)10600 g
Depth (without stand)59.5 mm
Width (without stand)731 mm
Height (without stand)428 mm
Weight (without stand)7800 g

Related product manuals