Eizo FlexScan S1932 User Manual

15
Chapter 2 Settings and Adjustments
●
To adjust the contrast [Contrast]
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range: 0 to 100%
(1) Press .
The adjustment menu appears.
(2) Select (Color).
(3) Adjust the contrast with or of (Contrast).
(4) Select .
The adjustment is completed.
●
To adjust the gamma value [Gamma]
The gamma value can be adjusted. The luminance of the monitor varies
depending on the input signal, however, the variation rate is not proportional to
the input signal. To keep the balance between the input signal and the luminance
of the monitor is called as “Gamma correction”.
Adjustable range: 1.8, 2.0, 2.2
(1) Press .
The adjustment menu appears.
(2) Select (Color).
(3) Select (Color Menu).
(4) Adjust the gamma value with or of (Gamma).
(5) Select .
The adjustment is completed.
NOTE
• You can also adjust the contrast by
pressing
while the adjustment
menu is not displayed, and press
or
of (Contrast).
• In the contrast of 50%, every color
gradation is displayed.
• Whenadjustingthemonitor,it
is recommended to perform the
brightness adjustment which may
not lose the gradation characteristics,
prior to the contrast adjustment.
Perform the contrast adjustment in the
following cases.
–Whenyoufeeltheimageisdark
even if the brightness is set to
100%.
–Whenyoufeeltheblacklevelofthe
screen is bright (Set the brightness
down and the contrast to higher
than 50%).
NOTE
• You can also adjust the contrast by
pressing
while the adjustment
menu is not displayed, and press
or
of (Contrast).
• In the contrast of 50%, every color
gradation is displayed.
• Whenadjustingthemonitor,it
is recommended to perform the
brightness adjustment which may
not lose the gradation characteristics,
prior to the contrast adjustment.
Perform the contrast adjustment in the
following cases.
–Whenyoufeeltheimageisdark
even if the brightness is set to
100%.
–Whenyoufeeltheblacklevelofthe
screen is bright (Set the brightness
down and the contrast to higher
than 50%).
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 14.)
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 14.)

Eizo FlexScan S1932 Specifications

General

Pixel pitch	0.294 x 0.294 mm
Response time	8 ms
Display diagonal	19 \
Display resolution	1280 x 1024 pixels
Digital vertical frequency	59 - 61 Hz
Digital horizontal frequency	31 - 64 kHz
Display brightness (typical)	250 cd/m²
HDCP	Yes
DVI-I ports quantity	-
USB Type-A downstream ports quantity	0
Power consumption (typical)	45 W
Product color	Gray

Weight and Dimensions

Depth (with stand)	205 mm
Height (with stand)	506 mm
Weight (with stand)	7200 g
Depth (without stand)	62 mm
Width (without stand)	405 mm
Height (without stand)	334 mm
Weight (without stand)	5200 g