Eizo FlexScan S1932 - Chapter 1 Features and Overview

3
Chapter 1 Overview and Features
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• Over drive circuit for clear motion pictures
• Dual-input system (DVI-D, D-sub)
3-1 “Connecting Two PCs to the Monitor” (page 22)
• BrightRegulator
2-5 “Setting Enable/Disable for the automatic brightness adjustment function”
(page 18)
• Contrast Enhancer
“To set Enable/Disable of the contrast enhancer” (page 17)
• Sharpness
2-4 “Adjusting Sharpness” (page 18)
• Auto adjust
2-2 “Screen Adjustment” (page 10)
• 11 bit gamma correction
“To adjust the gamma value” (page 15)
• Built-in speakers
“Adjusting Speaker Volume” (page 6) in the Setup Manual (supplied)
• FineContrast mode to allow the best mode for screen display.
2-3 “Color Adjustment” (page 13)
• Adjustment menu to execute the target function by simple operation.
1-3 “Basic operation of Adjustment menu and the icon list” (page 5)
• Theutilitysoftware“ScreenManagerProforLCD”(forWindows)tocontrol
the monitor from a PC with mouse/keyboard is included
Refer to “About ScreenManager Pro for LCD” on EIZO LCD Utility Disk.
• HDCP (High-bandwidth Digital Content Protection)
• DDC/CI (Display Data Channel Command Interface)
2-9 “Enabling/Disabling DDC/CI communication” (page 19)
NOTE
• The stand of the unit can be replaced
with an arm or another stand. (Refer
to “5-1 Attaching an Arm” on
page
26.)