Eizo FlexScan S1932 - To Adjust the Hue [Hue]; To Set Enable;Disable of the Contrast Enhancer [Cont Enhancer]

17
Chapter 2 Settings and Adjustments
●
To adjust the hue [Hue]
This function allows you to adjust the hue. If you set the hue to a high value,
the image turns greenish. If low, the image turns purplish.
Adjustable range: -100 to 100
(1) Press .
The adjustment menu appears.
(2) Select (Color).
(3) Select (Color Menu).
(4) Select (Advanced).
(5) Adjust the hue with or of (Hue).
(6) Select .
The adjustment is completed.
●
To set Enable/Disable of the contrast enhancer
[Cont Enhancer]
This function allows you to reproduce images with a taste of contrast by
compensating the gamma value as well as controlling the backlight brightness
and the gain level according to the image status.
(1) Press .
The adjustment menu appears.
(2) Select (Color).
(3) Select (Color Menu).
(4) Select (Advanced).
(5) The Enable/Disable setting is toggled by selecting (Cont Enhancer).
Enable
Disable
(6) Select .
The mode selected is set.
Attention
• This function does not enable to
display every color gradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 14.)
Attention
• This function does not enable to
display every color gradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 14.)
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 14.)
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 14.)