EKF Diagnostics Hemo Control User Manual

Measurement
User Manual Hemo Control
15
5.2 Measurement
Inserting the microcuvette and closing the cuvette holder starts the
measurement. Depending on the configuration, several options are
available prior to the measurement.
! Warning !
Ensure the cuvette is correctly positioned in the cuvette holder.
The microcuvette must be inserted flat. The angled handle of the
microcuvette must point to the right, see Figure 15.
Figure 15 - Correctly positioned cuvette Figure 16 - Incorrectly positioned cuvette
Figure 17 - Ready
PT: Selection of patient type. This button is only displayed if
measurement with Hb limit values is activated. This function is
activated in the Menu under item 6.6, Hb limits. If a patient type
has been selected, this type is displayed by an accordant symbol
in the PT button. (M=male, F=female, C=child)
Closing the cuvette holder starts the
measurement.
Figure 18 - Measuring
Angled handle
Angled handle
Ready
Patient Type M
15:00
Measuring
Memory
Menu
15:00

EKF Diagnostics Hemo Control Specifications

General

Brand	EKF Diagnostics
Model	Hemo Control
Category	Test Equipment
Language	English