EKF Diagnostics Hemo Control User Manual

Accessories and Connections
User Manual Hemo Control
23
7. Accessories and Connections
The device is provided with an interface on its rear side. The following
components may be connected. The order numbers of the individual
accessories can be found in Section 12.1, page 36.
! Note !
Only use the components below with their proper connecting
cables. Otherwise, the device may be damaged.
7.1 Data cable
The data cable serves to establish a connection between Hemo Control
and a POCT Data Manager. Depending on the cable type, connection is
via a serial D-sub 9 port or a USB interface.
7.2 Printer
Measurement results can be printed with
the thermal printer MCP1880. Print
function is activated in the Print menu.
See Section 6.9.2, page 21.
Figure 22 - Thermal printer

EKF Diagnostics Hemo Control Specifications

General

Brand	EKF Diagnostics
Model	Hemo Control
Category	Test Equipment
Language	English