Intended Use
User Manual Hemo Control
2. Intended Use
The Hemo Control measuring system is intended to be used for the
quantitative determination of hemoglobin (Hb) concentrations in human
blood. It consists of the Hemo Control photometer and Hemo_Control
Hemoglobin Microcuvettes.
Using the reagent filled microcuvette a small amount of arterial, venous
or capillary blood is taken up by capillary action. The filled microcuvette
is inserted into the Hemo Control photometer. The color produced by
chemical reaction in the microcuvette is measured and the Hb value is
displayed. The microcuvettes are intended for singular use only and
must be disposed of after their use as potentially infectious waste in
accordance with the current regulations applicable to your
establishment.
The Hemo Control photometer is intended for use in medical practices
and in clinical laboratories to assist in medical diagnostic investigations.
In addition, it can be used in emergency and intensive care units and in
medical facilities such as blood donor sessions and blood banks.
Only qualified personnel with profound skills in handling in vitro
diagnostic devices and this system should be allowed to take blood
samples and operate the Hemo Control photometer.
To Next Page
Loading...
Need help?
General