Measurement
User Manual Hemo Control
5.5 Measured value memory
In the Open state the Memory button can be used to open the
measured value memory with various functions.
The number of symbols displayed may
vary depending on the options selected
prior to measurement.
Figure 20 – Patient memory
(X) (X+) (X-): Selected patient type and if value has exceeded or fallen
below the limit values.
X stands for M [male], F [female] or C [child].
R: The measured value has been rejected by the operator.
Options: Further options; refer to next figure.
Arrow: Scrolls through measured value memory.
Figure 21 - Options
Print: Print currently selected value. This option is only
available if print is activated (see Section 6.9.2, page 21)
156 g/L (X+)
Hct≈46%
01.10.2014 14:53
To Next Page
Loading...