14
Briefly press one of the two arrows to select
a symbol. The selected symbol is displayed
with a black background. Pressing the OK
button takes you to the sub-menu. Once you
have completed your configuration in the sub-
menu and confirmed your selection with the
OK button, you will be taken back to the main
menu. Pressing the Back button will also take
you back to the main menu. The last stage will
be cancelled and you will be returned to the
previous status.
3 Settings, functions and displays
Settings can be changed in configuration and
display mode. In order to go to configuration
and display mode, there must not be a
sensor inserted in the measuring device.
The configuration and display mode can be
switched on or o by holding down the OK
button for two seconds. An acoustic signal will
sound, and the main menu will be displayed
along with its symbols. The symbols display
the sub-menus
1
:
• Stored test results (1A)
• Device settings (1B)
• Functionality test (1C)
• Sensor code configuration (1D)
• Stopwatch function (1E)
• Heart rate (1F)
1D
1E
1F
1A
1B
1C
1
Choose a symbol to move to the associated
sub-menu.
To Next Page
Loading...
Need help?
General
