31
4.2 Heart rate during step tests
If a device is connected to an active heart
rate monitor, the heart rate for each exertion
level is displayed along with the lactate
value
4
-
6
.
The heart rate displayed is the maximum
rate detected during the minute leading up
to the lactate measurement. For this reason,
it is important to measure the lactate level
immediately after each exertion level.
4.3 Displaying the post-exertion phase
During the post-exertion phase, the amount of
time since the last test in the exertion phase
is also displayed by the measuring device in
measuring mode
8
.
The time display is updated every 10 seconds.
The post-exertion time display is limited to
20 minutes.
8
To Next Page
Loading...