7
1.3 Inserting the batteries
The Lactate Scout 4 requires two CR2450 (3V
lithium button cell) batteries.
The device is supplied with batteries included.
Firstly, remove both of the battery insulating
strips
3
.
The measuring device must be turned o to
replace the batteries. Gently push the battery
cover on the back outwards. Remove the
discharged batteries. When inserting the new
batteries, ensure that the polarity is correct.
Push the battery cover back in until it
completely locks into place
4
.
If the time to replace the batteries exceeds
30seconds, the date and time setting will be
lost and must be re-entered. However, any
stored data and settings will be retained.
3
4
PLEASE NOTE
Used batteries must not be disposed of
with household waste. End users have
a statutory obligation to ensure used batteries
are returned for recycling. Used batteries can be
returned free of charge to retailers or collection
points.
To Next Page
Loading...
