22
If you press any button, the heart rate display
will be activated for another 10 seconds
20
.
If the connection (temporarily) fails, then
theheart symbol will remain empty
21
.
Heart rate values can be recorded for a
maximum of approximately 30 hours. After
this point, the earliest recorded values will be
overwritten.
The heart rate will no longer be measured if
the measuring device fails to connect to the
heart rate monitor after three automated
attempts.
20 21
If an individual lactate test is performed while
the heart rate is being recorded, or a lactate
test is performed during a step test, then the
heart rate recorded in the minute prior to
the lactate test will be stored along with the
lactate value.
If the sensor is removed in measurement
mode or while the heart rate is being
measured, the measuring device will switch to
standby mode to save energy.
Heart rate data can be accessed from the
Lactate Scout Assistant software when
transferred with lactate values.
To Next Page
Loading...
Need help?
General
