Elcometer 319 User Manual

14
R
7.5 Exporting readings
The stored data can be exported to a computer
using the optional interface cable and EDTS
+
software - see “Data transfer software (EDTS
+
)”
on page 18 for additional instructions:
All stored Datasets will be sent to the computer.
Export can be stopped at any time by pressing
.
Press Display shows
1.
MEMORY oN
2.
RECALL
a
a.If RECALL does not appear, memory is empty.
3. x 2
EXPORT
4. Ensure EDTS is running and ready to
receive data
5.
HOLD
OFF
HOLD
OFF

Elcometer 319 Specifications

General

Humidity Range	0 to 100% RH
Data Logging	Yes
Resolution	0.1% RH, 0.1°C (0.1°F)
Battery type	2 x AA batteries
Measurement Parameters	Relative Humidity, Air Temperature, Surface Temperature
Display	LCD
Measurement Range	0 - 100% RH