Elcometer 319 User Manual

5
R
2 QUICK START
1. Fit batteries (see page 6).
2. Press to switch on.
3. Humidity and Temperature are shown on the
display.
4. If required, press or to change the
type of temperature displayed:
To learn how to store readings in memory, see
“Using your gauge memory” on page 11.
To learn how to set up your gauge, see “Gauge
set up” on page 16.
Ambient Surface Dewpoint Delta T
ON
C
F
%Rh
menu
alarm
link
Temperature
Humidity
Temperature type

Elcometer 319 Specifications

General

Humidity Range	0 to 100% RH
Data Logging	Yes
Resolution	0.1% RH, 0.1°C (0.1°F)
Battery type	2 x AA batteries
Measurement Parameters	Relative Humidity, Air Temperature, Surface Temperature
Display	LCD
Measurement Range	0 - 100% RH