Elcometer 319 User Manual

20
R
11 SURFACE TEMPERATURE PROBES
A range of alternative probes is available to
connect in place of the standard surface probe.
To use these optional external temperature
probes, the surface probe has to be removed
from the gauge by gently pulling the surface
probe by its plastic housing.
The optional external probes must be connected
in the same way as the standard surface probe.
Always make sure to align the probe connector
correctly.
12 SPARE PARTS AND ACCESSORIES
The following spare parts and accessories are
available from your local Elcometer supplier or
direct from Elcometer:
Rh Calibration Check Kit T31912969
Rh Check Capsule, 33% T31912988
Rh Check Capsule, 75% T31912989
Rh Check Capsules, 33% & 75% T31912990
Surface Temperature Probe
(spare)
T31916466
Liquid Temperature Probe T31916465
HP-IR Printer X99913877
Paper for HP-IR Printer T99913878
PC Interface Cable T31916504
Carry Case (spare) T31916451

Elcometer 319 Specifications

General

Humidity Range	0 to 100% RH
Data Logging	Yes
Resolution	0.1% RH, 0.1°C (0.1°F)
Battery type	2 x AA batteries
Measurement Parameters	Relative Humidity, Air Temperature, Surface Temperature
Display	LCD
Measurement Range	0 - 100% RH