Elcometer 319 User Manual

2
R
hank you for your purchase of this Elcometer
319 Dewmeter. Welcome to Elcometer.
Elcometer are world leaders in the design,
manufacture and supply of inspection equipment
for coatings and concrete. Our products cover all
aspects of coating inspection, from development
through application to post application inspection.
Your Elcometer 319 Dewmeter is a world beating
product. With the purchase of this product you
now have access to the worldwide service and
support network of Elcometer. For more
information visit our website at
www.elcometer.com
1 ABOUT YOUR GAUGE
The Elcometer 319 Dewmeter gauge is used to
check climatic conditions in the surface treatment
industry.
Your Elcometer 319 measures:
• Air temperature
• Relative humidity
• Surface temperature
From these measured values, your gauge then
calculates:
• Dewpoint temperature
• Delta T (∆T)
The Elcometer 319 Dewmeter has readings
memory and an internal clock. This allows
measurements and a date/time stamp to be
stored as they are taken.
The stored data can be viewed on the display,
printed via an infra-red link or downloaded to a
PC using an optional interface cable.
T

Elcometer 319 Specifications

General

Humidity Range	0 to 100% RH
Data Logging	Yes
Resolution	0.1% RH, 0.1°C (0.1°F)
Battery type	2 x AA batteries
Measurement Parameters	Relative Humidity, Air Temperature, Surface Temperature
Display	LCD
Measurement Range	0 - 100% RH