www.elcometer.com
WELCOME
Thank you for your purchase of this Elcometer 456 Coating
Thickness Gauge. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of
coatings inspection equipment. Our products cover all aspects of
coating inspection, from development through application to post
application inspection.
The Elcometer 456 Coating Thickness Gauge is a world beating
product. With the purchase of this gauge you now have access to the
worldwide service and support network of Elcometer.
For more information visit www.elcometer.com
ABOUT YOUR GAUGE
The Elcometer 456 Coating Thickness Gauge is a handheld gauge for
fast and accurate measurement of the thickness of coatings on metal
substrates.
The gauge is available in four models; Model E, B, S and T.
This manual describes the operation of all the Elcometer 456 models
and indicates, where necessary, which specific model(s) the feature is
available on in brackets after the feature.
All versions of the gauge feature an easy-to-use menu driven
graphical interface which guides the user through tasks such as
gauge configuration and calibration adjustment.
The gauge is available either with a built-in integral probe or as a
separate probe version. A wide range of probes is available to suit
requirements.
CONVENTIONS IN THESE INSTRUCTIONS
The Elcometer 456 is operated using a simple menu structure which
helps you get the most from your gauge.
As an example, the Languages option is located within Setup which is
under the Menu softkey and is shown in these instructions as:
Menu/Setup/Language
3
To Next Page
Loading...
