Elcometer 456 Model E - Gauge Icons & Error Codes (Ebst)

16 GAUGE ICONS & ERROR CODES (EBST)
Icon
Description Model
Number of Readings
BST
Mean (average)
BST
Standard Deviation
BST
Highest Reading BST
Lowest Reading BST
Coefficient of Variation BST
Elcometer Index Value (EIV) BST
NDFT Value (Nominal Dry Film Thickness) ST
Percentage of readings greater than or equal to the
NDFT Value
ST
Percentage of readings between 0.9 x NDFT and the
NDFT value
ST
90/10 Rule Pass ST
90/10 Rule Fail: 90% of readings are greater than the
NDFT value
ST
90/10 Rule Fail: At least one measurement is below 0.9
x NDFT. (If a number between 1 and 10 is displayed, insufficient
measurements have been taken to be statistically valid)
ST
Counted Average (when not in Batching) BST
High and Low Limit Set ST
Low Limit Set ST
High Limit Set ST
Number of readings above Limit
ST
Number of readings below Limit ST
en
R
www.elcometer.com 66
456 Dry Film Thickness Gauge
67 of 89For more information / 1300 287 935
mail@burwell.com.au / www.burwell.com.au