6 THE GAUGE FEATURES
The Elcometer 456 coating thickness gauge has a number of easy to use
features and functions to help the user be more efficient. These include:
Fast reading rate (EBST)
The Elcometer 456 is capable of taking greater than 70 accurate,
repeatable and reproducible measurements every minute.
Easy to use menu structure in more than 30 languages (EBST)
Designed to be intuitive, the Elcometer 456 menus and calibration
in s t r uctio n s a r e avail a b l e i n multi p l e l a nguag e s v i a
Menu/Setup/Language.
Bright colour screen (EBST)
Each gauge is supplied with a scratch and solvent resistant 2.4"
(60mm) TFT colour screen which clearly displays the reading. The
screen brightness can be adjusted manually (EBST) - via
Menu/Setup/Screen Settings/Screen Brightness/Manual or
automatically (BST) using the gauge’s ambient light sensor which can
be switched on via Menu/Setup/Screen Settings/Screen
Brightness/Auto.
Battery or USB Powered (EBST)
Each gauge can be powered either using 2 x AA lithium, alkaline or
rechargeable batteries or by connecting the Elcometer 456 to your PC
via a USB cable.
Two year gauge warranty (EBST)
The Elcometer 456 gauge is supplied with a 1 year warranty against
manufacturing defects. To extend this warranty to 2 years, simply
register your gauge via the elcometer.com website.
Emergency light mode (BST)
If all the lighting fails during an inspection in dark environments, the gauge
is fitted with an emergency light feature - once selected
(Menu/Emergency Light), the display turns bright white. To switch off this
function either press and hold the Esc softkey or power off the gauge.
R
To Next Page
Loading...
Need help?
General
