Elcometer 456 Model E - 13 Calibrating the Elcometer 456; Calibrating Model E on Rough Surfaces; Calibrating Model E on Smooth Surfaces; Calibrating Model E using Factory Calibration

13 CALIBRATING THE ELCOMETER 456 (EBST)
The Elcometer 456 gauge is available in 4 model versions. Each version
has a number of calibration methods as below:
For full descriptions of each calibration method please see page 19- 20.
The Elcometer 456 has on screen instructions to guide the user through
each calibration method.
Method
Model E
Model B
Model S
Model T
Factory
■ ■ ■ ■
Rough / 2 Point
■
■ ■
■
Zero
■ ■
■
Smooth
■ ■
■
Zero Offset
■ ■
Auto
■ ■
Calibrating the Elcometer 456 (Model E)
Press the Cal softkey and follow the on screen instructions.
a b c d
e
h g f
en
R
www.elcometer.com 60
456 Dry Film Thickness Gauge
61 of 89For more information / 1300 287 935
mail@burwell.com.au / www.burwell.com.au