Page 19 (40)
Rev 1 2018-03-21 www.elcon.se
Go to INDEX.
6.5 BATTERY FUSE
IMPORTANT READ THIS FIRST
Any electrical battery or battery powered device, equipment or vehicle having
the potential of dangerous evolution of heat must be prepared for transport
so as to prevent:
(a) a short circuit (e.g. in the case of batteries, by the effective insulation of
exposed terminals; or in the case of equipment, by disconnection of the
battery and protection of exposed terminals); and
(b) unintentional activation
1. To make sure that transport
regulations are met, the fuse for the
batteries is removed and placed in
the accessory box.
2. Locate the compartment lid.
3. Open the compartment lid
4. Open the accessory box.
5. Take out one of the two 25 A aM
fuses. (one is spare fuse)
6. Locate the battery fuse holder.
7. Unscrew the fuse holder cap (turn
counterclockwise)
8. Insert the fuse into the fuse holder
cap.
9. Insert the fuse with the cap into
the fuse holder.
10. Screw and tighten the fuse
holder. (Turn clockwise)
To Next Page
Loading...