Page 21 (40)
Rev 1 2018-03-21 www.elcon.se
Go to INDEX.
6.8 SA10A PROGRAM LOADER IN DISPLAY.
When the display shows
• Something happened to the SA10A that made it lose its program.
• Connect the unit to computer and start BTS11.
• Select what comport unit is connected to.
• A dialog will automatically appear to download the software.
IMPORTANT! Select SA10A V5.XX binary files in the dropdown list.
Open the file with the command button “Open”
• The new software will now be transferred to the Control unit. This may take a while.
When the display shows the following screen the SA10A is ready to use.
To Next Page
Loading...