Page 40 (40)
Rev 0 2018-03-21 www.elcon.se
Go to INDEX.
10 CE-DECLARATION.
Declaration of conformity
According to the
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Type of equipment
Test equipment for test of HV-circuit breakers in field
Brand name or trade mark
Switch Analyzer SA10A
Type designation(s)/Model no(s)
SA10A
Manufacturer’s name, address, telephone & fax no
Elcon AB
Hyttrisvägen 27
SE-770 14 Nyhammar, SWEDEN
Tel: +46 240 641110, Fax +46 240 13 19
The following standards and/or technical specifications, which comply with good engineering practice in safety
matters in force within the EEA, have been applied:
Standard EMC Standard LVD
EN 61326-1:2013 EN 61010-1:2010
EN 61000-6-2:2005 Overvoltage category II
EN 61000-6-4:2007+A1 Pollution degree II
FCC Part 15 Subpart B
We assure that relevant technical documentation (TCF) has been established and can be made available by:
Lars-Göran Eriksson, Product manager
Additional information
The product is CE-marked in 2018
As manufacturer/ the manufacturer’s authorized representative established within EEA,
we declare under our sole responsibility that the equipment follows the provisions of the
Directives stated above
Date and place of issue Signature of authorized person
Nyhammar 2018-01-10
Name & Position
Peter Johansson, Chairman
To Previous Page
Loading...