Page 6 (40)
Rev 1 2018-03-21 www.elcon.se
Go to INDEX.
• Testing the circuit breaker
Make sure that surrounding personal can’t touch the breaker during an operation.
If a test sequence shall be running in automatic mode it’s absolutely necessary to have a security circuit that prevent
surrounding personal to touch the test object during the sequence.
The power supplies for coils and motor must be interlocked to a security circuit that cut the power if the security
circuit is open.
Read also additional safety regulations presented in sections below.
3.1.1 Safety regulations. 3.2.1 Safety regulations.
3.3.1 Safety regulations. 3.4.1 Safety regulations.
To Next Page
Loading...