31
Transmit Noise Gate
The noise gate function mutes mic audio below a
selected audio threshold. This is useful in vehicles and
when operating in noisy outdoor environments. See
MENU:TX GATE for details.
Cross-Mode Operation
Cross-mode operation is possible in some cases. For
example, you could set up VFO A for SSB receive, and
VFO B for CW transmit, then enter SPLIT. When you
transmit, the SSB station will hear your CW signal at
the pitch of your sideone. Use a fairly slow CW speed,
e.g. 15 WPM, if you’re not sure of the SSB operator’s
code proficiency level.
You can also send CW in SSB mode without using
split, if the CW-in-SSB feature is enabled. See
MENU:CW WGHT for details.
Custom Power-On Banner
Your KX2 can display a customized text “banner” on
power-up, such as your name and callsign. The banner
scrolls across the VFO B display.
To set up a banner, use the Configuration screen of the
KX2 Utility application.
To Next Page
Loading...
