CTC-1132 868AM 2007.07.18
9
1 1
2 2ABCabc
3 3DEFdef
4 4GHIghi
5 5JKLjkl
6 6MNOmno
7 7PQRSpqrs
8 8TUVtuv
9 9WXYZwxyz
0 0<space>/-&’.”+
¿ ¿
# #
4
Delete character
and backspace
User #2 PIN code is set up and user
name specified.
) 3) “¿¿¿¿” representing this User #3
code is programmed without user
name specified.
) 4) “●●●●” representing the User #4
code is not yet set up for activation.
Step 8. Proceed to set additional User PIN
Codes as instructed from Step 2 ~
Step 7. When done, press “ ” and
the screen returns to “General
settings” menu, setting the PIN code
is completed.
<
<
N
N
O
O
T
T
E
E
>
>
) In Step 5, if the code is not correct, a
“Code is not correct” prompt message
will be displayed 2 sec., and you are
requested to repeat Step 3 to enter
again.
User Naming
Each individual User can be given a name for
easy recogniztion when understanding system
events. User Names can be named in the first-
time setting or by resetting. The procedure is
similar for both situations.
z When the “Enter New Name” screen is
displayed, the keypad can be used to
enter text. Simply locate the
corresponding numeric keys to the desired
alphabets/symbols and press repeatedly
until the wanted alphabets/symbols appear.
Release the key and the flashing cursor
automatically jumps to the next position for
you to continue with the next letter by the
same method.
z The keys have the following functions:
z When the name is complete, press “OK”
to confirm and return to the previous or
main menu.
<
<
N
N
O
O
T
T
E
E
>
>
) The name can be erased or clearing
the display by entering backward
spaces “
” and pressing “OK”.
z To Delete User PIN code
Except User #1 which is activated by factory
default and can’t be deleted in any way,
User#2, 3 and 4 PIN code can be deleted by
following the steps below:
Step 1. Move the cursor to the item “Pin Code”
then press “OK”, the following screen
will show the status of each User PIN
code:
*
1 ) M R . S M I T H
2 ) M R S . S M I T H
3)
¿¿¿¿¿¿
4)... . . .
Step 2. Move the cursor to the desired # (2~4)
of programmed user PIN code to be
deleted, then press “OK” the following
screen is displayed.
Delet e
P i n - C o d e ( + O k ) ?
Step 3. Press “OK” and the screen returns to
previous one with the deleted User
PIN code marked with “●●●●”.
z To Edit User PIN code
All 4 User PIN code can be edited freely by the
following steps:
Step 1. Move the cursor to the item “Pin Code”
then press “OK” the following screen
will show the status of each User PIN
code:
*
1 ) M R . S M I T H
2 ) M R S . S M I T H
3)
¿¿¿¿¿¿
4)... . . .
Step 2. Move the cursor to the desired # (2~4)
of programmed user PIN code to be
deactivated/deleted, then press “OK”
the following screen is displayed.
Delet e
P i n - C o d e ( + O k )
To Next Page
Loading...